Proceedings of the 2016 International Conference on Mechanics, Materials and Structural Engineering

Alkali anisotropic chemical etching of p-silicon wafer

Authors
Hussien. A. Motaweh
Corresponding Author
Hussien. A. Motaweh
Available Online March 2016.
DOI
10.2991/icmmse-16.2016.34How to use a DOI?
Keywords
KOH etchant, Anisotropy etching, Surface morphology
Abstract

The surface chemistry of anisotropic etching of p-type Si-wafer (400) is reviewed and the anisotropic chemical etching of silicon in alkaline solution using wetting agent were discussed. The main factors which affect the production of silicon dioxide layer on crystalline silicon as a result of wet alkali anisotropic chemical etching are the concentration of etching solution (KOH) and wetting agent (n-propanol), temperature (80°C) and time of the etching (4 hr) process. Silicon dioxide layer has found applications in many advanced areas. The synthesized silica layer was systematically characterized by XRD, SEM and FTIR spectroscopy. The XRD results revealed the amorphous nature of silica layer. FTIR spectroscopy confirmed the presence of Si-O in produced samples. SEM confirmed the addition of n-propanol to the KOH solution resulted in an improvement in the etching anisotropy in a smooth etched Si (400) surface.

Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2016 International Conference on Mechanics, Materials and Structural Engineering
Series
Advances in Engineering Research
Publication Date
March 2016
ISBN
10.2991/icmmse-16.2016.34
ISSN
2352-5401
DOI
10.2991/icmmse-16.2016.34How to use a DOI?
Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Hussien. A. Motaweh
PY  - 2016/03
DA  - 2016/03
TI  - Alkali anisotropic chemical etching of p-silicon wafer
BT  - Proceedings of the 2016 International Conference on Mechanics, Materials and Structural Engineering
PB  - Atlantis Press
SP  - 200
EP  - 205
SN  - 2352-5401
UR  - https://doi.org/10.2991/icmmse-16.2016.34
DO  - 10.2991/icmmse-16.2016.34
ID  - Motaweh2016/03
ER  -