Proceedings of the 2016 4th International Conference on Machinery, Materials and Computing Technology

The Research and Development of Appropriate Metal Fittings for Drop-out Fuse Connecting Terminal

Authors
Bo Li, Tianshu Hai, Qinghao Wang, Yanjun Pang, Ning Zhang, Yang Su, Rui Yang, Lin Han
Corresponding Author
Bo Li
Available Online March 2016.
DOI
10.2991/icmmct-16.2016.264How to use a DOI?
Keywords
drop-out fuse; cross bus; contact overheating; contact area; appropriate metal fitting
Abstract

his paper discusses the problems existing in the use of drop-out fuse: due to wind swing and other reasons, the bonding point of Cu-Al contact is easy to break, which may lead to the malfunction; the actual contact area between under contact and Cu-Al contact in transformer lead wire is insufficient ,it is easy to cause overheating and burning of contact; the type of insulated conductor in transformer cross bus is general 35mm²JKLYJ ,and cannot be installed ground, the distance between drop-out fuse upper contact and under contact is 0.3m, it is less than 0.7m, This does not meet the requirements of the installation of grounding wire. This paper not only introduced the design ideas and advantages of appropriate metal fitting, but also introduced the field usage. The appropriate metal fitting is simple to install, easy to operate, and other characteristics, it can greatly improve the power grid safety, economy and reliability.

Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2016 4th International Conference on Machinery, Materials and Computing Technology
Series
Advances in Engineering Research
Publication Date
March 2016
ISBN
978-94-6252-165-0
ISSN
2352-5401
DOI
10.2991/icmmct-16.2016.264How to use a DOI?
Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Bo Li
AU  - Tianshu Hai
AU  - Qinghao Wang
AU  - Yanjun Pang
AU  - Ning Zhang
AU  - Yang Su
AU  - Rui Yang
AU  - Lin Han
PY  - 2016/03
DA  - 2016/03
TI  - The Research and Development of Appropriate Metal Fittings for Drop-out Fuse Connecting Terminal
BT  - Proceedings of the 2016 4th International Conference on Machinery, Materials and Computing Technology
PB  - Atlantis Press
SP  - 1342
EP  - 1345
SN  - 2352-5401
UR  - https://doi.org/10.2991/icmmct-16.2016.264
DO  - 10.2991/icmmct-16.2016.264
ID  - Li2016/03
ER  -