Research on New Technology of Semi-steel Dephosphorization in Ladle Based on Water Simulation Experiment
Yonghui Han, Daqiang Cang
Available Online March 2016.
- https://doi.org/10.2991/icmmct-16.2016.170How to use a DOI?
- ladle;dephosphorization; semi-steel;mixing time;water simulation.
- Dephosphorization in the ladle is a new type of dephosphorization method. The water simulation experiment of semi-steel dephosphorization in 100t ladle of Chengde steel has been carried out.The best mixing time has been investigated for various process parameters of blowing oxygen lance and bottom blowing.It turns out to be that the best location of the pure bottom blowing is 0.7R-120 Â°,the best bottom blowing flow rate is 100L/min;and the best of the top bottom blowing rate is 3000 Nm3/h,top gun angle is 60Â°, top lance height is 500mm.The order of three elements on influencing the mixing time is as follows:Top blowing flow >top gun height > top gun angle.The average of dephosphorus efficiency is 51.8% in industrial experiments.
- Open Access
- This is an open access article distributed under the CC BY-NC license.
Cite this article
TY - CONF AU - Yonghui Han AU - Daqiang Cang PY - 2016/03 DA - 2016/03 TI - Research on New Technology of Semi-steel Dephosphorization in Ladle Based on Water Simulation Experiment BT - 2016 4th International Conference on Machinery, Materials and Computing Technology PB - Atlantis Press SP - 863 EP - 866 SN - 2352-5401 UR - https://doi.org/10.2991/icmmct-16.2016.170 DO - https://doi.org/10.2991/icmmct-16.2016.170 ID - Han2016/03 ER -