Proceedings of the 2016 4th International Conference on Machinery, Materials and Computing Technology

<Previous Article In Volume
Next Article In Volume>

Research on Computerized Simulation of Occlusal Contacts for Complete Denture Based on 3D Digitized Modeling

Authors
Wei-can Chen
Corresponding Author
Wei-can Chen
Available Online March 2016.
DOI
10.2991/icmmct-16.2016.25How to use a DOI?
Keywords
Complete denture; Occlusal contacts; Laser scanning; 3D digitized model; Computerized simulation
Abstract

Aiming at solving the problems on dynamic occlusion of complete denture in the field of dental restoration, this paper presents a computerized system from the viewpoint of integration of related disciplines. Firstly the displacement matrix of mandibular movement on Hanau articulator is established by means of the method of the direction cosine matrix in spatial mechanism. Secondly by programming in Matlab 6.5 (a language for technical computing), VC6.0 ++ and VTK (Visualization ToolKit), and adopting these techniques such as laser scanning, computer graphics, and computer database, a 3D digitized model of the denture has been reconstructed; And then the 3D coordinate data of mark points are measured. On basis of this digitized model, the computerized simulation system of occlusal contacts for complete denture is developed. With the aid of this system, the dynamic occlusive procedure of the complete denture mounted on Hanau articulator is clearly observed at any required angle and location of views, in addition, the posit ions of the occlusal contacts is obtained. Therefore this study is helpful to research on the dynamic occlusion of complete denture and improve dental restorative procedures.

Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 2016 4th International Conference on Machinery, Materials and Computing Technology
Series
Advances in Engineering Research
Publication Date
March 2016
ISBN
10.2991/icmmct-16.2016.25
ISSN
2352-5401
DOI
10.2991/icmmct-16.2016.25How to use a DOI?
Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

risenwbib
TY  - CONF
AU  - Wei-can Chen
PY  - 2016/03
DA  - 2016/03
TI  - Research on Computerized Simulation of Occlusal Contacts for Complete Denture Based on 3D Digitized Modeling
BT  - Proceedings of the 2016 4th International Conference on Machinery, Materials and Computing Technology
PB  - Atlantis Press
SP  - 131
EP  - 136
SN  - 2352-5401
UR  - https://doi.org/10.2991/icmmct-16.2016.25
DO  - 10.2991/icmmct-16.2016.25
ID  - Chen2016/03
ER  -