The confirmation of simulation parameter and analysis of temperature field of 430 ferrite stainless steel in water-cooling condition with 3D-CAFE method
Authors
Pei-Xiao Liu, Yan-Xiang Li, Rui-Peng Pang
Corresponding Author
Pei-Xiao Liu
Available Online April 2016.
- DOI
- 10.2991/icmit-16.2016.130How to use a DOI?
- Keywords
- 3D-CAFE; columnar grains; equiaxed grains
- Abstract
Under water cooling condition, the solidification structure is almost equiaxed grains, and the diameter of equiaxed grains is 0.5 mm~1mm, columnar grains are relative small, columnar grain width is only a few tenths of millimeters, with the length is 0.5 mm~1.5 mm. When the top heat transfer coefficient is 100 W/ (m2 K), and the around and the bottom heat transfer coefficient are 2000 W/ (m2 K)respectively, the solidification structure of the simulation computation is basically with experiment. the casting formed a symmetrical temperature field along the longitudinal section during solidification, the casting top grey area is solidifying contraction.
- Copyright
- © 2016, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - Pei-Xiao Liu AU - Yan-Xiang Li AU - Rui-Peng Pang PY - 2016/04 DA - 2016/04 TI - The confirmation of simulation parameter and analysis of temperature field of 430 ferrite stainless steel in water-cooling condition with 3D-CAFE method BT - Proceedings of the 2016 3rd International Conference on Mechatronics and Information Technology PB - Atlantis Press SP - 726 EP - 730 SN - 2352-538X UR - https://doi.org/10.2991/icmit-16.2016.130 DO - 10.2991/icmit-16.2016.130 ID - Liu2016/04 ER -