Proceedings of the 2016 3rd International Conference on Mechatronics and Information Technology

Design and analysis of cold stamping process for the car beam left/right section

Authors
Yang Xu, Penghao Lian, Haipeng Li, Lihui Wang
Corresponding Author
Yang Xu
Available Online April 2016.
DOI
10.2991/icmit-16.2016.79How to use a DOI?
Keywords
Car beam left/right section, Cold stamping, Forming process, Simulation analysis, Process parameters
Abstract

The cold stamping forming processes of the car beam left/right section were designed and analyzed using the CAD/CAE technology and related software. Based on the establishment of the numerical model for the car beam left/right section, the stamping processes of the product were determined through the technical analysis. In particular, the effects of different drawing schemes and parameters (including blank-holder force, blank size, lubrication conditions, etc) on the manufacturability of the product were investigated by numerical simulation technology. The forming effects were evaluated according to forming limit diagram and thickness distribution diagram. As a result, the reasonable process design and optimum parameters are obtained, which can reduce the tendencies of wrinkling, cracking and thickness reduction, and achieve sufficient plastic deformation of the blank.

Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2016 3rd International Conference on Mechatronics and Information Technology
Series
Advances in Computer Science Research
Publication Date
April 2016
ISBN
10.2991/icmit-16.2016.79
ISSN
2352-538X
DOI
10.2991/icmit-16.2016.79How to use a DOI?
Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Yang Xu
AU  - Penghao Lian
AU  - Haipeng Li
AU  - Lihui Wang
PY  - 2016/04
DA  - 2016/04
TI  - Design and analysis of cold stamping process for the car beam left/right section
BT  - Proceedings of the 2016 3rd International Conference on Mechatronics and Information Technology
PB  - Atlantis Press
SP  - 439
EP  - 446
SN  - 2352-538X
UR  - https://doi.org/10.2991/icmit-16.2016.79
DO  - 10.2991/icmit-16.2016.79
ID  - Xu2016/04
ER  -