The Effect of CuO addition on low temperature co-firing PZT ferroelectric ceramics in multilayer device application

DOI

10.2991/icmia-16.2016.83How to use a DOI?

Keywords

PZT95/5 ceramics; ferroelectric properties; CuO; piezoelectric properties

Abstract

Low-temperature sintering of Pb0.995Cd0.005(Zr0.965Ti0.035)O3 ceramics was investigated using CuO as a sintering aid. Effect of CuO addition on the sinter ability, microstructure, and electric properties of PZT ceramics were systematically studied. The addition of CuO significantly promoted the densification of PZT and reduced the sintering temperature of PZT ceramics to 1050°C. PZT ceramics with CuO addition were sintered at 1150°C and exhibit a high density of 7.6g/cm3, which corresponds to the approximately 96% theoretical density. And the optimized value for the piezoelectric coefficient d33 of 66 pC/N was obtained for 0.05% CuO-added PZT ceramics, which shows a great promise for multilayer actuator applications.

Copyright

© 2016, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Xiumei Shi
AU  - Tao Zeng
AU  - Hong Cui
AU  - Lijun Zhang
PY  - 2016/11
DA  - 2016/11
TI  - The Effect of CuO addition on low temperature co-firing PZT ferroelectric ceramics in multilayer device application
BT  - Proceedings of the 2016 5th International Conference on Measurement, Instrumentation and Automation (ICMIA 2016)
PB  - Atlantis Press
SN  - 1951-6851
UR  - https://doi.org/10.2991/icmia-16.2016.83
DO  - 10.2991/icmia-16.2016.83
ID  - Shi2016/11
ER  -