Proceedings of the 2016 5th International Conference on Measurement, Instrumentation and Automation (ICMIA 2016)

Design of Prefabricated External Thermal Insulation System with Point Supported Horizontal Keel

Authors
Shibing Sun, Lu Zhang, Wanjin Wang, Donghua Liu
Corresponding Author
Shibing Sun
Available Online November 2016.
DOI
10.2991/icmia-16.2016.10How to use a DOI?
Keywords
External thermal insulation system ETIS; Prefabricated; Point supporting; Horizontal keel
Abstract

Based on the basic thought of industrialized building, one prefabricated external thermal insulation system ETIS with point supported horizontal keel was designed in this paper. Bad support was fastened on the structural wall and horizontal keel was fastened on bed support. Then panel was fixed on horizontal keel by interdigitated cards and moreover thermal insulation material was fastened on the structural wall independently. ETIS has the ability to adjust the three-dimension and angle. The installation of panel could not only be invisible, but also be disassembled independently. The test result indicated that weathering resistance could meet the requirements of relevant standards and the maxima of wind resistance could be up to -6300Pa. In addition, panel deformation performance, air impermeability and water tightness could reach grade 5, grade 4 and grade 5, respectively.

Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2016 5th International Conference on Measurement, Instrumentation and Automation (ICMIA 2016)
Series
Advances in Intelligent Systems Research
Publication Date
November 2016
ISBN
978-94-6252-256-5
ISSN
1951-6851
DOI
10.2991/icmia-16.2016.10How to use a DOI?
Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Shibing Sun
AU  - Lu Zhang
AU  - Wanjin Wang
AU  - Donghua Liu
PY  - 2016/11
DA  - 2016/11
TI  - Design of Prefabricated External Thermal Insulation System with Point Supported Horizontal Keel
BT  - Proceedings of the 2016 5th International Conference on Measurement, Instrumentation and Automation (ICMIA 2016)
PB  - Atlantis Press
SP  - 48
EP  - 54
SN  - 1951-6851
UR  - https://doi.org/10.2991/icmia-16.2016.10
DO  - 10.2991/icmia-16.2016.10
ID  - Sun2016/11
ER  -