The Design of Control System for Water Dispenser Water Content Based on MCU

DOI

10.2991/icmeit-17.2017.74How to use a DOI?

Keywords

AT89S52 MCU; LCD; temperature probe ultrasonic module

Abstract

This page proposed a Water dispenser water temperature and water yield control system which used MCU AT89S52 as the core, it can be achieved heating water and monitoring water levels. To preset temperature through the input module, to detect water temperature by waterproof model DS18b20 temperature sensor and displays the real-time temperature of drinking water by using 1602 LCD screen. Compared with the preset temperature real-time temperature, heating water if the real-time temperature is lower than the preset temperature, otherwise stop heating. The water level can be positioned though the ultrasonic module, can be sounded the alarm when the liquid level height below the warning line. The system has very high use value with the advantages of simple design

Copyright

© 2017, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Shiyong Zheng
AU  - Zhao Li
AU  - Biqing Li
PY  - 2017/05
DA  - 2017/05
TI  - The Design of Control System for Water Dispenser Water Content Based on MCU
BT  - Proceedings of the 2nd International Conference on Mechatronics Engineering and Information Technology (ICMEIT 2017)
PB  - Atlantis Press
SP  - 378
EP  - 381
SN  - 2352-538X
UR  - https://doi.org/10.2991/icmeit-17.2017.74
DO  - 10.2991/icmeit-17.2017.74
ID  - Zheng2017/05
ER  -