Proceedings of the 2016 International Conference on Mechatronics Engineering and Information Technology

Effect of Geometrical Parameters on Wrinkling of 0Cr21Ni6Mn9N Stainless Steel Tube in Numerical Control Bending

Authors
Jun Fang, Shiqiang Lu, Kelu Wang, Xuguang Min
Corresponding Author
Jun Fang
Available Online August 2016.
DOI
10.2991/icmeit-16.2016.32How to use a DOI?
Keywords
0Cr21Ni6Mn9N tube, wrinkling, geometrical parameters, rotary draw bending
Abstract

In order to study the effects of geometrical parameters on wrinkling of 0Cr21Ni6Mn9N stainless steel tube in numerical control (NC) bending process, a three dimensional elastic plastic finite element model of the 0Cr21Ni6Mn9N stainless steel tube in NC bending was established based on ABAQUS/Explicit code, and its reliability was validated by experiment. Then, simulation and analysis of the effect rules of the bending angle, relative bending radius and relative tube diameter on wrinkling wave ratio were carried out. The results show that the wrinkling wave ratio increases with the increasing of the bending angle, and the amplitude of the increase slows down. The wrinkling wave ratio decreases with the increasing of the relative bending radius or decreasing of the relative tube diameter. The research results provide beneficial knowledge on bending behaviors of 0Cr21Ni6Mn9N stainless steel tube under different geometrical parameters and help efficient design and optimization of the forming parameters.

Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2016 International Conference on Mechatronics Engineering and Information Technology
Series
Advances in Engineering Research
Publication Date
August 2016
ISBN
978-94-6252-222-0
ISSN
2352-5401
DOI
10.2991/icmeit-16.2016.32How to use a DOI?
Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Jun Fang
AU  - Shiqiang Lu
AU  - Kelu Wang
AU  - Xuguang Min
PY  - 2016/08
DA  - 2016/08
TI  - Effect of Geometrical Parameters on Wrinkling of 0Cr21Ni6Mn9N Stainless Steel Tube in Numerical Control Bending
BT  - Proceedings of the 2016 International Conference on Mechatronics Engineering and Information Technology
PB  - Atlantis Press
SP  - 163
EP  - 166
SN  - 2352-5401
UR  - https://doi.org/10.2991/icmeit-16.2016.32
DO  - 10.2991/icmeit-16.2016.32
ID  - Fang2016/08
ER  -