Evaluation of tribological properties of thin coatings formed by solid lubricants

Matúš Čuchor; Jozef Bronček; Marián Dzimko; Jozef Jenis; Michal Lukáč

doi:10.2991/978-94-6463-423-5_46

<Previous Article In Volume

Next Article In Volume>

Evaluation of tribological properties of thin coatings formed by solid lubricants

Authors

Matúš Čuchor¹^{, *}, Jozef Bronček¹, Marián Dzimko¹, Jozef Jenis¹, Michal Lukáč¹

¹Univerzity of Žilina, Univerzitná 8215/1, 01026, Žilina, Slovakia

^*Corresponding author. Email: matus.cuchor@fstroj.uniza.sk

Corresponding Author

Matúš Čuchor

Available Online 22 May 2024.

DOI: 10.2991/978-94-6463-423-5_46 How to use a DOI?
Keywords: DLC Coating; Tribometer; Coefficient of Friction
Abstract: The article deals with the evaluation of tribological properties of thin coatings formed by solid lubricants. The aim is to obtain and compare data obtained in experiment. The monitored parameter is the coefficient of friction, which is evaluated on three types of samples. The samples are made of bearing steel with designation 100Cr6. After heat treatment, martensitic, sorbitic and bainitic structures were obtained. Thus prepared matrices were coated with WC/C based DLC coating. The experiment was carried out on a tribometer which works on the principle of “Ball on Flat”. The tribological pair consisted of two members: a coated test specimen and a steel ball. All three samples were tested under the same external sub-conditions: without lubricant and under atmospheric conditions. The tensometric sensor included in the tribometer recorded and evaluated the coefficient of friction throughout the duration of the experiment. The results are clearly interpreted in the graph. The experiment showed that the coefficient of friction in all cases had a decreasing tendency. At the end of the paper, the wear on the ball is evaluated graphically.
Copyright: © 2024 The Author(s)
Open Access: Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume

Next Article In Volume>

Volume Title: Proceedings of the 62nd International Conference of Machine Design Departments (ICMD 2022)
Series: Atlantis Highlights in Engineering
Publication Date: 22 May 2024
ISBN: 10.2991/978-94-6463-423-5_46
ISSN: 2589-4943
DOI: 10.2991/978-94-6463-423-5_46 How to use a DOI?
Open Access: Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

ris enw bib

TY  - CONF
AU  - Matúš Čuchor
AU  - Jozef Bronček
AU  - Marián Dzimko
AU  - Jozef Jenis
AU  - Michal Lukáč
PY  - 2024
DA  - 2024/05/22
TI  - Evaluation of tribological properties of thin coatings formed by solid lubricants
BT  - Proceedings of the 62nd International Conference of Machine Design Departments (ICMD 2022)
PB  - Atlantis Press
SP  - 416
EP  - 424
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-423-5_46
DO  - 10.2991/978-94-6463-423-5_46
ID  - Čuchor2024
ER  -

download .riscopy to clipboard