Proceedings of the 62nd International Conference of Machine Design Departments (ICMD 2022)

<Previous Article In Volume
Next Article In Volume>

Numerical analysis of the velocity of abrasive particles in an abrasive blasting device

Authors
Josef Vosahlo1, *, Pavel Srb1
1Institute for Nanomaterials, Advanced Technologies and Innovation, Technical University of Liberec, Studentska 2, Liberec, 46117, Czech Republic
*Corresponding author. Email: josef.vosahlo@tul.cz
Corresponding Author
Josef Vosahlo
Available Online 22 May 2024.
DOI
10.2991/978-94-6463-423-5_16How to use a DOI?
Keywords
Numerical Simulation; Blasting Technology; Blasting Wheel; Abrasive Particles
Abstract

The article deals with by using numerical analysis of abrasive particle velocity in blast technology. Blasting technology is an important industrial process that allows the application of materials to surfaces using high pressure or air velocity. The velocity of abrasive particles is a key parameter of the blasting process. For the high performance of blasting equipment, it is necessary for the abrasive particles to hit the treated surface at a given angle and speed. The velocity distribution of individual abrasive particles must be as uniform as possible. A two-dimensional FEM model of the interior space of the blasting equipment was created, where the flow of abrasive particles of various sizes was simulated. The numerical simulation was performed for various input parameters, including the use of different shapes of blades of the blast wheel. The obtained results will lead to the design of an innovative blasting device with higher performance.

Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 62nd International Conference of Machine Design Departments (ICMD 2022)
Series
Atlantis Highlights in Engineering
Publication Date
22 May 2024
ISBN
10.2991/978-94-6463-423-5_16
ISSN
2589-4943
DOI
10.2991/978-94-6463-423-5_16How to use a DOI?
Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Josef Vosahlo
AU  - Pavel Srb
PY  - 2024
DA  - 2024/05/22
TI  - Numerical analysis of the velocity of abrasive particles in an abrasive blasting device
BT  - Proceedings of the 62nd International Conference of Machine Design Departments (ICMD 2022)
PB  - Atlantis Press
SP  - 139
EP  - 146
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-423-5_16
DO  - 10.2991/978-94-6463-423-5_16
ID  - Vosahlo2024
ER  -