Proceedings of the 62nd International Conference of Machine Design Departments (ICMD 2022)

<Previous Article In Volume
Next Article In Volume>

Composite Frame Of The Electric Car Body With Inserts M8_5 BN 4575

Authors
Ladislav Ševčík1, *
1Department of Machine Design, Mechanical Faculty, Technical University of Liberec, Studentska 2, 46117, Liberec 1, Czech Republic
*Corresponding author. Email: ladislav.sevcik@tul.cz
Corresponding Author
Ladislav Ševčík
Available Online 22 May 2024.
DOI
10.2991/978-94-6463-423-5_33How to use a DOI?
Keywords
Electric Vehicle; Glass Composite; Stress and Deformation Calculation; Nut Rivet
Abstract

The frame of the electric car is assembled from two parts. The lower part, made of welded pipes, carrying all aggregates. It supports the upper part of the frame made of composite profiles in 16 places. The rectangular system of composite beams fills an area measuring 4x2m. The beams are interconnected by steel braces. These are mainly placed in the crosses of the supporting structure. Furthermore, due to the variability and simplicity of assembly, the beams are not glued. When the structure is approved, it will be possible to glue the composite structure with steel reinforcements. The aim is to optimize this structure in terms of stresses and strains in case of an extraordinary event - the overturning of a loaded electric car while driving in a corner.

Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 62nd International Conference of Machine Design Departments (ICMD 2022)
Series
Atlantis Highlights in Engineering
Publication Date
22 May 2024
ISBN
10.2991/978-94-6463-423-5_33
ISSN
2589-4943
DOI
10.2991/978-94-6463-423-5_33How to use a DOI?
Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Ladislav Ševčík
PY  - 2024
DA  - 2024/05/22
TI  - Composite Frame Of The Electric Car Body With Inserts M8_5 BN 4575
BT  - Proceedings of the 62nd International Conference of Machine Design Departments (ICMD 2022)
PB  - Atlantis Press
SP  - 298
EP  - 302
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-423-5_33
DO  - 10.2991/978-94-6463-423-5_33
ID  - Ševčík2024
ER  -