Investigation of temperature change for two flexible pneumatic elements dynamically loaded

Jozef Krajňák; Lucia Žuľová; Matúš Kačír

doi:10.2991/978-94-6463-423-5_49

<Previous Article In Volume

Next Article In Volume>

Investigation of temperature change for two flexible pneumatic elements dynamically loaded

Authors

Jozef Krajňák¹^{, *}, Lucia Žuľová¹, Matúš Kačír¹

¹Faculty of Mechanical Engineering, Technical University of Kosice, Letna 9, 04200, Kosice, Slovak Republic

^*Corresponding author. Email: jozef.krajnak@tuke.sk

Corresponding Author

Jozef Krajňák

Available Online 22 May 2024.

DOI: 10.2991/978-94-6463-423-5_49 How to use a DOI?
Keywords: Couplings; Measuring; Flexible elements; Element temperature
Abstract: Pneumatic flexible elements are used in pneumatic shaft couplings. These flexible elements are connected in different ways, and they are pressurized with a certain pressure. The article examines temperature changes of two connected elastic elements. It also describes measuring devices, and it examines the stresses of these elements. The article describes the measuring device constructed and designed in our laboratory. We describe its main parts and its working mode. The main aim was to find out the effect of the number of connecting holes on temperatures, the number of which we can change. Also, the aim of this article is to determine the temperature changes of flexible elements with different interconnections. We are investigating 2 flexible pneumatic elements. We measured the temperature of the air in the flexible element, the temperature of the outer and inner surface of the flexible element. In conclusion, we state the effect of the number of connecting holes on all three temperatures under investigation.
Copyright: © 2024 The Author(s)
Open Access: Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume

Next Article In Volume>

Volume Title: Proceedings of the 62nd International Conference of Machine Design Departments (ICMD 2022)
Series: Atlantis Highlights in Engineering
Publication Date: 22 May 2024
ISBN: 10.2991/978-94-6463-423-5_49
ISSN: 2589-4943
DOI: 10.2991/978-94-6463-423-5_49 How to use a DOI?
Open Access: Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

ris enw bib

TY  - CONF
AU  - Jozef Krajňák
AU  - Lucia Žuľová
AU  - Matúš Kačír
PY  - 2024
DA  - 2024/05/22
TI  - Investigation of temperature change for two flexible pneumatic elements dynamically loaded
BT  - Proceedings of the 62nd International Conference of Machine Design Departments (ICMD 2022)
PB  - Atlantis Press
SP  - 446
EP  - 454
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-423-5_49
DO  - 10.2991/978-94-6463-423-5_49
ID  - Krajňák2024
ER  -

download .riscopy to clipboard