Proceedings of the 2016 7th International Conference on Mechatronics, Control and Materials (ICMCM 2016)

Laboratory Experiment Research on Multi-slug Alternative Injection Method of Polymer Flooding

Authors
Bin Huang, Cheng Fu
Corresponding Author
Bin Huang
Available Online December 2016.
DOI
10.2991/icmcm-16.2016.65How to use a DOI?
Keywords
enhanced oil recovery; polymer flooding; alternative injection; concentration gradually decreased injection
Abstract

On simulation of reservoir conditions in Daqing Oilfield, the effect of different method of multi-slug alternative injection, concentration gradually decreased injection, and concentration increasing injection on oil displacement efficiency are studied by laboratory experiment. The experimental results show that, under the condition of the same total amount of polymer, recovery percent of reserves of polymer flooding stage will increase with the increase of polymer concentration. The scheme which using the concentration gradually decreased method, the extent of enhancing recovery is maximum, polymer flooding recovery can reach 40.12%, and the ultimate recovery can reach 80.48%.

Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2016 7th International Conference on Mechatronics, Control and Materials (ICMCM 2016)
Series
Advances in Engineering Research
Publication Date
December 2016
ISBN
10.2991/icmcm-16.2016.65
ISSN
2352-5401
DOI
10.2991/icmcm-16.2016.65How to use a DOI?
Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Bin Huang
AU  - Cheng Fu
PY  - 2016/12
DA  - 2016/12
TI  - Laboratory Experiment Research on Multi-slug Alternative Injection Method of Polymer Flooding
BT  - Proceedings of the 2016 7th International Conference on Mechatronics, Control and Materials (ICMCM 2016)
PB  - Atlantis Press
SP  - 322
EP  - 325
SN  - 2352-5401
UR  - https://doi.org/10.2991/icmcm-16.2016.65
DO  - 10.2991/icmcm-16.2016.65
ID  - Huang2016/12
ER  -