Proceedings of the International Conference on Innovation in Science and Technology (ICIST 2020)

<Previous Article In Volume
Next Article In Volume>

Comparative Analysis of Press Tool Design for Seat Lock Patch of Mobilio Car with AutoForm Technology

Authors
Meri Rahmi*
Dept. of Mechanical Engineering, Politeknik Negeri Indramayu, Indramayu, Indonesia
Yuliar Yasin Erlanggauwie@polman-bandung.ac.id
Dept. of Design Engineering, Politeknik Manufaktur Negeri Bandung, Bandung, Indonesia
Dedi Suwandidedi@polindra.ac.id, Yusup Nur Rohmatyusupnurrohmat@polindra.ac.id
Dept. of Mechanical Engineering, Politeknik Negeri Indramayu, Indramayu, Indonesia
Sidik Permana77sidik@gmail.com, Aida Mahmudaaida@polman-bandung.ac.id
Dept. of Design Engineering, Politeknik Manufaktur Negeri Bandung, Bandung, Indonesia
Corresponding Author
Meri Rahmi
Available Online 30 November 2021.
DOI
10.2991/aer.k.211129.067How to use a DOI?
Keywords
press tool; group tool; combination tool; AutoForm
Abstract

Users of four-wheeled vehicles or cars in Indonesia are increasing every year. Therefore, the production of manufacturing companies in the automotive sector is increasing. This relates to companies providing vehicle components that are formed from sheet metal material to be mass-produced with the same shape and tolerance. To achieve this, an effective and efficient press tool design is required. The seat lock patch is one of the many components of sheet metal material found in four-wheeled vehicles or cars. Its function is to lock the third-row seats on the Mobilio car. Products are made in three processes are, drawing, redrawing, trimming-piercing. This study aims to determine the efficiency and effectiveness of the press tool design that best accommodates the process for manufacturing these components in one stamping process. The method used is the method of analysis and comparison of the press tool design, between the group tool and the combination tool with the help of AutoForm Engineering software technology. Based on the results of the analysis with AutoForm technology, were found that the most optimal press tool process for making the third-row seat locking patch on a Mobilio Car is the group tool. The better, optimal, time-efficient selection of third-row seat locking patches on a Mobilio Car is the group tool. Also, this method is easier in terms of the setting process in the press machine.

Copyright
© 2021 The Authors. Published by Atlantis Press International B.V.
Open Access
This is an open access article under the CC BY-NC license.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the International Conference on Innovation in Science and Technology (ICIST 2020)
Series
Advances in Engineering Research
Publication Date
30 November 2021
ISBN
978-94-6239-472-8
ISSN
2352-5401
DOI
10.2991/aer.k.211129.067How to use a DOI?
Copyright
© 2021 The Authors. Published by Atlantis Press International B.V.
Open Access
This is an open access article under the CC BY-NC license.

Cite this article

risenwbib
TY  - CONF
AU  - Meri Rahmi
AU  - Yuliar Yasin Erlangga
AU  - Dedi Suwandi
AU  - Yusup Nur Rohmat
AU  - Sidik Permana
AU  - Aida Mahmuda
PY  - 2021
DA  - 2021/11/30
TI  - Comparative Analysis of Press Tool Design for Seat Lock Patch of Mobilio Car with AutoForm Technology
BT  - Proceedings of the International Conference on Innovation in Science and Technology (ICIST 2020)
PB  - Atlantis Press
SP  - 316
EP  - 320
SN  - 2352-5401
UR  - https://doi.org/10.2991/aer.k.211129.067
DO  - 10.2991/aer.k.211129.067
ID  - Rahmi2021
ER  -