Proceedings of the 4th International Conference on Innovative Research Across Disciplines (ICIRAD 2021)

Analysis and Simulation of Current Zero Crossing Time Interval Under Different Loads

Authors
I Wayan Sutaya1, *, Ketut Udy Ariawan1, I Gede Nurhayata1
1Electronic Engineering Study Program, Universitas Pendidikan Ganesha, Singaraja, Indonesia
*Corresponding author. Email: wsutaya@undiksha.ac.id
Corresponding Author
I Wayan Sutaya
Available Online 21 December 2021.
DOI
10.2991/assehr.k.211222.044How to use a DOI?
Keywords
Zero crossing; MATLAB; Different loads
Abstract

This paper discusses the use of zero-crossing in switching for three types of loads, namely resistive, inductive, and capacitive. The switching process using zero crossings and not using zero crossings was simulated with MATLAB software and then the simulation results were analyzed. The results of the simulation and analysis show that in resistive loads with zero-crossing the switching process to break the connection between the voltage source and the load there is no voltage at the terminals so as to prevent the occurrence of arcs in the switch device. Whereas inductive loads, the use of zero-crossing is able to prevent the arcs going from source to load, but unfortunately because the current and voltage are in different phases, so when switching at the zero voltage point the current is not at zero, so the reverse current will be able to cause the arcs in the switch device. In capacitive loads, the addition of zero-crossing will prevent the occurrence of arcs in the switch device. When the voltage is switched at zero, it means that the voltage on the capacitive load is also at zero. The reverse voltage of a capacitive load is determined by the final voltage of the source. The time interval for a voltage to zero is also shown in the simulation so that it can be used by electronics practitioners in building electronic devices that use switching for large currents.

Copyright
© 2021 The Authors. Published by Atlantis Press SARL.
Open Access
This is an open access article under the CC BY-NC license.

Download article (PDF)

Volume Title
Proceedings of the 4th International Conference on Innovative Research Across Disciplines (ICIRAD 2021)
Series
Advances in Social Science, Education and Humanities Research
Publication Date
21 December 2021
ISBN
10.2991/assehr.k.211222.044
ISSN
2352-5398
DOI
10.2991/assehr.k.211222.044How to use a DOI?
Copyright
© 2021 The Authors. Published by Atlantis Press SARL.
Open Access
This is an open access article under the CC BY-NC license.

Cite this article

TY  - CONF
AU  - I Wayan Sutaya
AU  - Ketut Udy Ariawan
AU  - I Gede Nurhayata
PY  - 2021
DA  - 2021/12/21
TI  - Analysis and Simulation of Current Zero Crossing Time Interval Under Different Loads
BT  - Proceedings of the 4th International Conference on Innovative Research Across Disciplines (ICIRAD 2021)
PB  - Atlantis Press
SP  - 272
EP  - 278
SN  - 2352-5398
UR  - https://doi.org/10.2991/assehr.k.211222.044
DO  - 10.2991/assehr.k.211222.044
ID  - Sutaya2021
ER  -