Proceedings of the 5th International Conference on Information Engineering for Mechanics and Materials

Geometric modeling design and vibration modal analysis of wind turbine generator blade

Authors
Zhiping Zhang, Hanwu Liu, Liupo Chen, Liran Xu
Corresponding Author
Zhiping Zhang
Available Online July 2015.
DOI
10.2991/icimm-15.2015.141How to use a DOI?
Keywords
Wind turbine blade; Vibration stability; Modal analysis; Numerical simulation.
Abstract

The wind turbine blade is the most complex part of wind turbine generator system (WTGS).The blade itself will produce flutter and divergence under the joint effect of vibration model and aerodynamic force. That the coupling resonance of tower and wind turbine impeller will be produced, when the natural frequency of blade flutter and the frequency of exciting force are the same, will seriously affect the stability of WTGS. This instability of system caused by the coupling resonance will also react upon the blade so as to appear blade fracture phenomenon. This paper analyzed and calculated the vibration model of the wind turbine blade under working condition with the finite element analysis software ANSYS and worked out the vibration frequency and vibration modes of the first nine orders. The analysis results show that the vibration modes of the blade mainly are waving vibration and shimmy vibration in working condition; the displacement values of shimmy vibration are bigger than the displacement values of waving vibration in the cases of similar frequency; Shimmy vibration is the most important vibration mode; In high-order stage, the vibration mode is the superposition of waving vibration, shimmy vibration and torsional vibration modes which is very complex. The results of the study provide the technical support for the improvement and optimization design of the stability of the whole WTGS.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 5th International Conference on Information Engineering for Mechanics and Materials
Series
Advances in Engineering Research
Publication Date
July 2015
ISBN
978-94-62520-88-2
ISSN
2352-5401
DOI
10.2991/icimm-15.2015.141How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Zhiping Zhang
AU  - Hanwu Liu
AU  - Liupo Chen
AU  - Liran Xu
PY  - 2015/07
DA  - 2015/07
TI  - Geometric modeling design and vibration modal analysis of wind turbine generator blade
BT  - Proceedings of the 5th International Conference on Information Engineering for Mechanics and Materials
PB  - Atlantis Press
SP  - 748
EP  - 753
SN  - 2352-5401
UR  - https://doi.org/10.2991/icimm-15.2015.141
DO  - 10.2991/icimm-15.2015.141
ID  - Zhang2015/07
ER  -