The Development of Static Load Testing Instrument for Piles Based on the Internet of Things
- 10.2991/iceesd-18.2018.243How to use a DOI?
- Static load test, axial compressive bearing capacity of piles, internet of things
An IoT-based wireless intelligent testing instrument is developed for static load test of piles, and it is applied to a field test in order to measure the axial compressive bearing capacity of a pile, while traditional wired devices are also deployed in the same test for comparison. The comparison shows that the wireless intelligent testing instrument can be installed without wiring, and the non-contact, high-accuracy displacement measuring method is suitable for the static load test of piles. Both of the test results of the wireless and the wired testing instrument indicate that the settlement rate of the tested pile satisfies the relative stable condition proposed by the testing code, which implies that the tested pile is qualified for practical use.
- © 2018, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - Jieming Li AU - Xiaodan Huang AU - Minzhang Mei PY - 2018/05 DA - 2018/05 TI - The Development of Static Load Testing Instrument for Piles Based on the Internet of Things BT - Proceedings of the 2018 7th International Conference on Energy, Environment and Sustainable Development (ICEESD 2018) PB - Atlantis Press SP - 1336 EP - 1341 SN - 2352-5401 UR - https://doi.org/10.2991/iceesd-18.2018.243 DO - 10.2991/iceesd-18.2018.243 ID - Li2018/05 ER -