Asynchronous Motor Modeling and Dynamic Co - Simulation Based on ANSYS
- 10.2991/iceesd-18.2018.15How to use a DOI?
- ANSYS; three-phase asynchronous motor; modeling; simulation
Three-phase asynchronous motor simulation model was established based on ANSYS software, the effect factor on the modeling of three-phase asynchronous motor was analyzed in this paper, such as the physical environment to create, geometric model of the stator, rotor geometry model, the asynchronous motor rotor field oriented vector control system model is established with the help of matlab, the collaborative simulation technology were analyzed with the help of ANSYS and matlab. the experimental results show that the experiment platform make abstract concepts more clear and intuitive, meet the requirements of the motor test system. The design, proofing, validation and modification is the Classic motor design and experimental methods, motor development and experiment cycle is long, cost is high, the magnetic pole shape and tooth distribution of the modern motor is complex and diverse, it make the magnetic circuit complex, at the same time because of the uneven distribution of magnetic flux, the distortion and the local loss of permanent magnet etc, the classic motor design and experimental methods already can't satisfy the need. Aiming at the key problem in the motor design and experiment, the asynchronous motor stator, rotor, and the air gap model will be established using ANSYS software, through the joint simulation between the ANSYS and other software simulation, the magnetic field distribution, the inductance of the motor, torque, etc of the grid division of each node will be accurately calculated, rejection of heat, mechanical properties and electromagnetic properties of the motor will be analyzed.
- © 2018, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - Zhaozhao Wang AU - Luo Tao AU - Jianwei Mei AU - Weikang He PY - 2018/05 DA - 2018/05 TI - Asynchronous Motor Modeling and Dynamic Co - Simulation Based on ANSYS BT - Proceedings of the 2018 7th International Conference on Energy, Environment and Sustainable Development (ICEESD 2018) PB - Atlantis Press SP - 103 EP - 108 SN - 2352-5401 UR - https://doi.org/10.2991/iceesd-18.2018.15 DO - 10.2991/iceesd-18.2018.15 ID - Wang2018/05 ER -