The wear characteristics of wire rope used in the self-propelled orchard transport

DOI

10.2991/iccmcee-15.2015.267How to use a DOI?

Keywords

wire rope, wear rule, local flaw, loss of metallic cross-sectional area.

Abstract

In order to ensure the stability of double track orchard self-propelled transport system and prevent tensile failure induced by the broken wire rope, we try to measure the state characteristics of the wire rope using the appropriate testing techniques and analysis methods, and monitor the wear condition of the wire rope according to the certain evaluation criteria. Considering the economic and operational convenience, the MTC computer wire rope flaw detector is used to detect the state and performance of the wire rope. After setting up and calibrating the parameters of the flaw detector, analyze the repeatability of the results of wire rope wear test, and then choose the LF and LMA data and curves of specific wire ropes to make comparisons. Results show that the testing method proposed in this paper is reproducible and reliable; the lifetime of a steel wire rope is about 3 - 4 years; the regular and gradual change of the broken wire are observed, and the broken wire position is concentrated; the wear also gradually increase and the largest section loss rate is up to 16.46%.

Copyright

© 2015, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - WeiWei Liu
AU  - ShanJun Li
AU  - XiuLan Bao
PY  - 2015/11
DA  - 2015/11
TI  - The wear characteristics of wire rope used in the self-propelled orchard transport
BT  - Proceedings of the 2015 4th International Conference on Computer, Mechatronics, Control and Electronic Engineering
PB  - Atlantis Press
SP  - 1418
EP  - 1423
SN  - 2352-5401
UR  - https://doi.org/10.2991/iccmcee-15.2015.267
DO  - 10.2991/iccmcee-15.2015.267
ID  - Liu2015/11
ER  -