Proceedings of the 2015 4th International Conference on Computer, Mechatronics, Control and Electronic Engineering

Load Distribution among the Teeth of Flexspline of Harmonic Drive with Double Circular-arc Tooth Profile

Authors
GuiHua Wu, XiaoJiang Peng
Corresponding Author
GuiHua Wu
Available Online November 2015.
DOI
10.2991/iccmcee-15.2015.204How to use a DOI?
Keywords
Harmonic drive, double circular-arc tooth, load distribution.
Abstract

Based on the basic theory of harmonic drive, circular spline profile is computed by envelope method when flexspline profile chooses double circular-arc tooth. The load distribution among the teeth of the flexspline has been calculated under different working conditions. When the force intersection angle of the four-acting-force wave Generator decreases, the load distribution will become centralized, and the maximum force acting on the areas of the teeth will also increase.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2015 4th International Conference on Computer, Mechatronics, Control and Electronic Engineering
Series
Advances in Engineering Research
Publication Date
November 2015
ISBN
978-94-6252-110-0
ISSN
2352-5401
DOI
10.2991/iccmcee-15.2015.204How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - GuiHua Wu
AU  - XiaoJiang Peng
PY  - 2015/11
DA  - 2015/11
TI  - Load Distribution among the Teeth of Flexspline of Harmonic Drive with Double Circular-arc Tooth Profile
BT  - Proceedings of the 2015 4th International Conference on Computer, Mechatronics, Control and Electronic Engineering
PB  - Atlantis Press
SP  - 1083
EP  - 1086
SN  - 2352-5401
UR  - https://doi.org/10.2991/iccmcee-15.2015.204
DO  - 10.2991/iccmcee-15.2015.204
ID  - Wu2015/11
ER  -