Proceedings of the 2015 4th International Conference on Computer, Mechatronics, Control and Electronic Engineering

Automatic Centerline Extraction and Error Analysis Based on Machine Vision for Bending Pipe Image

Authors
Hui Wen, DuanLing Li, Jinquan Li
Corresponding Author
Hui Wen
Available Online November 2015.
DOI
10.2991/iccmcee-15.2015.45How to use a DOI?
Keywords
Machine vision, pipe centerline, perspective error, error compensation
Abstract

Centerline reflects the shape characteristics of pipes, and centerline extraction is widely used in automation equipment field and Medical field. This paper proposes a method to automatically extract bending pipe's centerline with technology of image filtering and de-noising and edge detection. By finding the outer edge of the pipe, the paper creates a distance model, and the centerline of the pipe is a series of points with shortest distance between two outside edges. In error analysis, the paper analyzes the radial distortion and tangential distortion caused by a camera and also analyzes the perspective error which is very important to centerline extraction problem. By simultaneously analyzing the error of these three areas this paper presents a more accurate calculation method of the centerline. Finally, the paper verifies the correctness of the methods through experiments.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2015 4th International Conference on Computer, Mechatronics, Control and Electronic Engineering
Series
Advances in Engineering Research
Publication Date
November 2015
ISBN
978-94-6252-110-0
ISSN
2352-5401
DOI
10.2991/iccmcee-15.2015.45How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Hui Wen
AU  - DuanLing Li
AU  - Jinquan Li
PY  - 2015/11
DA  - 2015/11
TI  - Automatic Centerline Extraction and Error Analysis Based on Machine Vision for Bending Pipe Image
BT  - Proceedings of the 2015 4th International Conference on Computer, Mechatronics, Control and Electronic Engineering
PB  - Atlantis Press
SP  - 237
EP  - 242
SN  - 2352-5401
UR  - https://doi.org/10.2991/iccmcee-15.2015.45
DO  - 10.2991/iccmcee-15.2015.45
ID  - Wen2015/11
ER  -