Numerical Analysis and Optimization Design of the Crossbeam Structure of the Wave-maker

Ping He; Qingze He; Chen Li

doi:10.2991/978-94-6463-372-6_32

<Previous Article In Volume

Next Article In Volume>

Numerical Analysis and Optimization Design of the Crossbeam Structure of the Wave-maker

Authors

Ping He¹^{, 2}^{, 3}^{, *}, Qingze He⁴, Chen Li¹^{, 2}^{, 3}

¹CCCC Tianjin Port Engineering Institute Co., Ltd, Tianjin, 300222, China

²CCCC First Harbor Engineering Company Ltd, Tianjin, 300456, China

³Key Laboratory of Coastal Engineering Hydrodynamic, CCCC, Tianjin, 300222, China

⁴College of Emergency Management and Safety Engineering, North China University of Science and Technology, Hebei Province, Qinhuangdao, 063200, China

^*Corresponding author. Email: ydheping@163.com

Corresponding Author

Ping He

Available Online 12 February 2024.

DOI: 10.2991/978-94-6463-372-6_32 How to use a DOI?
Keywords: Wave-maker; Crossbeam; Numerical Analysis; Optimization
Abstract: In order to reduce the redundancy of the crossbeam structure on the wave-maker and achieve lightweight design, numerical analysis was conducted on the crossbeam, and the results showed that there was a significant margin in both stiffness and strength. Based on the results of structural strength analysis, structural optimization design was carried out on the crossbeam model. The optimization results showed that under the premise of ensuring that the allowable deformation is less than 2mm and stress is less than 325Mpa, the crossbeam steel and layout were optimized. After improvement, the crossbeam mass was reduced by 14.0%, achieving the design goal of “light weight and good performance”. This research method provides a basis for the design and optimization of crossbeams.
Open Access: Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume

Next Article In Volume>

Volume Title: Proceedings of the 2023 5th International Conference on Civil Architecture and Urban Engineering (ICCAUE 2023)
Series: Atlantis Highlights in Engineering
Publication Date: 12 February 2024
ISBN: 10.2991/978-94-6463-372-6_32
ISSN: 2589-4943
DOI: 10.2991/978-94-6463-372-6_32 How to use a DOI?
Open Access: Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

ris enw bib

TY  - CONF
AU  - Ping He
AU  - Qingze He
AU  - Chen Li
PY  - 2024
DA  - 2024/02/12
TI  - Numerical Analysis and Optimization Design of the Crossbeam Structure of the Wave-maker
BT  - Proceedings of the 2023 5th International Conference on Civil Architecture and Urban Engineering (ICCAUE 2023)
PB  - Atlantis Press
SP  - 354
EP  - 360
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-372-6_32
DO  - 10.2991/978-94-6463-372-6_32
ID  - He2024
ER  -

download .riscopy to clipboard