Proceedings of the 2016 International Conference on Intelligent Control and Computer Application

A Method of Calculating Waist Width of Angle Steel Tower Based On VC++ and OSG

Authors
Changzhi Wang, Junke Han, Qinghua Li, Fei Wang, Xiao Tian
Corresponding Author
Changzhi Wang
Available Online January 2016.
DOI
10.2991/icca-16.2016.11How to use a DOI?
Keywords
Angle steel tower, Calculation of waist width, Double tangent circles, VC++
Abstract

The power transmission tower is a key part of the transmission line, the waist width shall be calculated correctly during two dimensional drawing and tower lofting, which is the fundamental to correct fabrication and assembly of the steel tower. In this paper, we deeply analyzed the connection mode of the principal in the variable slope tower body and the tower section of different size, on the basis of deep analysis of the alignment principle of the rod member main materials in the angle steel tower, calculation of the waist width at every tower section is solved through the double tangent circle method. In this way, we calculated the waist widths of the variable slope multiple tower bodies and the unchanged slope multiple tower sections accurately when ridges aligned. The method is tested and verified in several projects and the corresponding calculation program is written by VC++. Experiments in several projects show that the method is stable and reliable, which can meet the demand of the engineering well.

Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2016 International Conference on Intelligent Control and Computer Application
Series
Advances in Computer Science Research
Publication Date
January 2016
ISBN
978-94-6252-154-4
ISSN
2352-538X
DOI
10.2991/icca-16.2016.11How to use a DOI?
Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Changzhi Wang
AU  - Junke Han
AU  - Qinghua Li
AU  - Fei Wang
AU  - Xiao Tian
PY  - 2016/01
DA  - 2016/01
TI  - A Method of Calculating Waist Width of Angle Steel Tower Based On VC++ and OSG
BT  - Proceedings of the 2016 International Conference on Intelligent Control and Computer Application
PB  - Atlantis Press
SP  - 44
EP  - 47
SN  - 2352-538X
UR  - https://doi.org/10.2991/icca-16.2016.11
DO  - 10.2991/icca-16.2016.11
ID  - Wang2016/01
ER  -