Optimization of Derusting Guide Rod and Static and Dynamic Analysis
Authors
Hongbin Yang, Yujie Liu, Ning Xie, Ruiyi Li
Corresponding Author
Hongbin Yang
Available Online May 2018.
- DOI
- 10.2991/icammce-18.2018.93How to use a DOI?
- Keywords
- Puide bar; Natural frequency; Optimization and Improvement; vibration
- Abstract
In view of the problem of strong guide rod vibration and poor rust removal in the derusting process of the steel pipe inner wall rust-preventing guide rod of the coating production line , the structure of the guide rod was optimized and transformed. and the non-equal-section nesting structure was used to guide the static and dynamic analysis of the rod and the experimental verification show that after optimization, Finally it is concluded that the optimized guide rod deformation decreased by 38.3%, the concentration degree of the natural frequency increased by 41.38%, the working frequency is effectively avoided, and the quality of the rust removal after application is significantly improved.
- Copyright
- © 2018, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - Hongbin Yang AU - Yujie Liu AU - Ning Xie AU - Ruiyi Li PY - 2018/05 DA - 2018/05 TI - Optimization of Derusting Guide Rod and Static and Dynamic Analysis BT - Proceedings of the 2018 3rd International Conference on Advances in Materials, Mechatronics and Civil Engineering (ICAMMCE 2018) PB - Atlantis Press SP - 428 EP - 434 SN - 2352-5401 UR - https://doi.org/10.2991/icammce-18.2018.93 DO - 10.2991/icammce-18.2018.93 ID - Yang2018/05 ER -