Proceedings of the 2016 5th International Conference on Advanced Materials and Computer Science

Research on the Engineering Properties of Phosphogypsum Based on the Laboratory Test

Authors
Jing-Yi Zhang
Corresponding Author
Jing-Yi Zhang
Available Online June 2016.
DOI
10.2991/icamcs-16.2016.197How to use a DOI?
Keywords
Phosphogypsum, Shear Strength, Consolidation, Creep
Abstract

Phosphogypsum (PG) is one of the major solid wastes disposed on land. The safety evaluation of PG stacks is highly dependent on the correct characterization of its properties. Laboratory tests were performed to determine the physical and mechanical properties of PG, including its gradation, hydraulic conductivity, and consolidation characteristics. The shear strength of sedimented PG was determined through consolidated-undrained triaxial tests. Results show that PG is a dilatant granular material with a high internal friction angle. The odometer consolidation tests revealed that the consolidation of PG can last a long time after the initial sedimentation and the magnitude of consolidation caused by creep was significantly higher than that caused by compression. The measured vertical hydraulic conductivity of PG ranged from 10-5 cm/s to 2×10-4 cm/s, which is similar to that of silt. The CU triaxial tests showed that PG exhibits a dilalant behavior under all confining pressures and its shear strength is higher than that of most soil and mine tailings, with an effective peak friction angle of approximately 46.5°.

Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2016 5th International Conference on Advanced Materials and Computer Science
Series
Advances in Engineering Research
Publication Date
June 2016
ISBN
978-94-6252-189-6
ISSN
2352-5401
DOI
10.2991/icamcs-16.2016.197How to use a DOI?
Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Jing-Yi Zhang
PY  - 2016/06
DA  - 2016/06
TI  - Research on the Engineering Properties of Phosphogypsum Based on the Laboratory Test
BT  - Proceedings of the 2016 5th International Conference on Advanced Materials and Computer Science
PB  - Atlantis Press
SP  - 973
EP  - 977
SN  - 2352-5401
UR  - https://doi.org/10.2991/icamcs-16.2016.197
DO  - 10.2991/icamcs-16.2016.197
ID  - Zhang2016/06
ER  -