Photocatalytic Characteristic of Fe-doped Tio2 with Phenol
- https://doi.org/10.2991/icaemt-15.2015.157How to use a DOI?
- doping, phenol, photodegradation, Fe, TiO2
Fe doped TiO2 particles were synthesized by sol-gel method. This gel was dried at 70 during 2 hours and afterwards was calcined at 450 during 4 h. Under calcinations at 450 (4 h), catalyst particle with an average diameter around 59 nm and monophasic anatase structure were obtained. The 0.3wt% Fe/TiO2 catalyst behaved as efficient and stable catalyst for the photodegradation of phenol solution. At the experimental conditions of initial phenol solution at 10 mg/L, initial pH of the phenol solution at 6.0, UV lamp at 20 W, catalysts concentration at 0.5 g/L , the COD removal of 99 % could be achieved after 240 min of photodegradation reaction.
- © 2015, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - Jingzheng Weng AU - Kaikai Zhang AU - Jiewei Huang AU - Feng Gao AU - Lihui Chen AU - Renhui Qiu PY - 2015/08 DA - 2015/08 TI - Photocatalytic Characteristic of Fe-doped Tio2 with Phenol BT - Proceedings of the 2015 International Conference on Advanced Engineering Materials and Technology PB - Atlantis Press SP - 831 EP - 835 SN - 2352-5401 UR - https://doi.org/10.2991/icaemt-15.2015.157 DO - https://doi.org/10.2991/icaemt-15.2015.157 ID - Weng2015/08 ER -