Simulation of Micro Blanking Process of Square Hole with Fillet Based on DEFORM-3D

DOI

10.2991/ic3me-15.2015.398How to use a DOI?

Keywords

Micro blanking DEFORM-3D Burr Blanking clearance.

Abstract

Simulation of Micro Blanking Process of Square Hole with Fillet was carried out based on DEFORM-3D. The ratio of burnish depth, shear depth and fracture depth to sheet thickness under different relative blanking clearance (c/t) was analyzed. The results show that the burnish depth at the fillet increases generally with the increasing blanking clearance, while the burnish depth at the straight-line segment firstly increases and then decreases with the increasing blanking clearance. The relationship between burr height and relative blanking clearances (c/t) was discussed. Results show that the average burr height increases with the increasing blanking clearance.

Copyright

© 2015, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Shining Zhou
AU  - Xiaolong Yang
AU  - Jing Sun
AU  - Wenji Xu
AU  - Xin Liu
PY  - 2015/08
DA  - 2015/08
TI  - Simulation of Micro Blanking Process of Square Hole with Fillet Based on DEFORM-3D
BT  - Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering
PB  - Atlantis Press
SP  - 2068
EP  - 2072
SN  - 2352-5401
UR  - https://doi.org/10.2991/ic3me-15.2015.398
DO  - 10.2991/ic3me-15.2015.398
ID  - Zhou2015/08
ER  -