Influence of Grid on pkHRR Test of Cone Calorimeter

DOI

10.2991/ic3me-15.2015.353How to use a DOI?

Keywords

cotton; PET; flame-retard; Cone; C.V

Abstract

Influence of grid on peak of Heat Release Rate (pkHRR) test of cone calorimeter was researched, in which cotton, flame-retard cotton, PET, and flame-retard PET fabric were used. Results show that coefficients of variation (C.V) of pkHRR values of cotton and flame-retard cotton were reduced from 8.5% and 11.1% to 4.6% and 4.3%, respectively. PkHRR values of PET and flame-retard PET fabric turned from abnormal distribution to normal distribution. C.V of pkHRR values tested with grid of PET and flame-retard PET fabric were 7.2% and 8.9%, respectively. Those demonstrate that adoption of grid increases significantly repeatability of pkHRR values of those fabrics.

Copyright

© 2015, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Weibin Xie
AU  - Ran Wang
AU  - Xiaochun Wang
PY  - 2015/08
DA  - 2015/08
TI  - Influence of Grid on pkHRR Test of Cone Calorimeter
BT  - Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering
PB  - Atlantis Press
SP  - 1832
EP  - 1836
SN  - 2352-5401
UR  - https://doi.org/10.2991/ic3me-15.2015.353
DO  - 10.2991/ic3me-15.2015.353
ID  - Xie2015/08
ER  -