Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering

Corrosion and Protection of the Condenser Seawater Cooling System

Authors
Qiang Fu, Lin Tian, Rui Wang, Yupei Ning, Yue Yang, Xuejun Xie
Corresponding Author
Qiang Fu
Available Online August 2015.
DOI
10.2991/ic3me-15.2015.338How to use a DOI?
Keywords
Seawater; Cycling cooling; Disadvantage
Abstract

Composition and main material of seawater cooling systems of power units are stated briefly. Some corrosion and protection examples of seawater cooling systems are summaried. In order to protect overall seawater cooling system, the suitable material should be chosen firstly, and surface treatment such as coating or lining and cathodic protection should be done well secondly. In order to protect seawater cycling cooling system, beyond that, protection of the seawater cycling cooling tower and biocide treatment of the seawater cycling cooling system should be done well, too. In addition, rubber ball cleaning should be done well, the seawater cycling cooling system, especially the inner surface of condenser pipes should be kept clean.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering
Series
Advances in Engineering Research
Publication Date
August 2015
ISBN
10.2991/ic3me-15.2015.338
ISSN
2352-5401
DOI
10.2991/ic3me-15.2015.338How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Qiang Fu
AU  - Lin Tian
AU  - Rui Wang
AU  - Yupei Ning
AU  - Yue Yang
AU  - Xuejun Xie
PY  - 2015/08
DA  - 2015/08
TI  - Corrosion and Protection of the Condenser Seawater Cooling System
BT  - Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering
PB  - Atlantis Press
SP  - 1753
EP  - 1757
SN  - 2352-5401
UR  - https://doi.org/10.2991/ic3me-15.2015.338
DO  - 10.2991/ic3me-15.2015.338
ID  - Fu2015/08
ER  -