Influence of the Normal Angle on the Thickness Uniformity for the Concave Combination with Two Flat Patches
Yong Zeng, Chuanhui Huang, Lei Zhang
Available Online August 2015.
- 10.2991/ic3me-15.2015.287How to use a DOI?
- Spray painting robot; thickness uniformity; concave combination; normal angle; Simulation
Due to the influence of the normal angle on the thickness uniformity for the concave combination with two flat patches, considering the paint spread impact on the thickness uniformity, a new spray trajectory optimization scheme for the concave combination with two flat patches is developed. The paint thickness deviation from the required paint thickness is optimized by modifying the paint gun velocity and the distance between adjacent trajectories. The results of simulations have shown that trajectory planning algorithm is effective.
- © 2015, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - Yong Zeng AU - Chuanhui Huang AU - Lei Zhang PY - 2015/08 DA - 2015/08 TI - Influence of the Normal Angle on the Thickness Uniformity for the Concave Combination with Two Flat Patches BT - Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering PB - Atlantis Press SP - 1490 EP - 1493 SN - 2352-5401 UR - https://doi.org/10.2991/ic3me-15.2015.287 DO - 10.2991/ic3me-15.2015.287 ID - Zeng2015/08 ER -