Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering

Design and Implementation of a High Efficient DDR SDRAM Controller Applied in TOF-MS

Authors
Qian Li, Ming Wang, Yang Yu
Corresponding Author
Qian Li
Available Online August 2015.
DOI
10.2991/ic3me-15.2015.265How to use a DOI?
Keywords
DDR SDRAM; data acquisition; controller
Abstract

Owing to large capacity and high speed, DDR SDRAM has been widely used in the data acquisition system of time-of-flight mass spectrometer (TOF-MS) which can detect and analyze biological and chemical macromolecule precisely. Due to the particularity of the requirement of large amounts of data accumulation in TOF-MS signal processing, the time cannot be efficiently used during reading and writing in traditional design of DDR SDRAM controller. This paper presents a new strategy of reading and writing, increasing the efficiency of data processing greatly and finally a DDR SDRAM controller has been implemented. Software simulation and hardware implementation prove the correctness and feasibility of this design and the efficiency of reading and writing reach up to 93.6%.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering
Series
Advances in Engineering Research
Publication Date
August 2015
ISBN
978-94-6252-100-1
ISSN
2352-5401
DOI
10.2991/ic3me-15.2015.265How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Qian Li
AU  - Ming Wang
AU  - Yang Yu
PY  - 2015/08
DA  - 2015/08
TI  - Design and Implementation of a High Efficient DDR SDRAM Controller Applied in TOF-MS
BT  - Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering
PB  - Atlantis Press
SP  - 1379
EP  - 1382
SN  - 2352-5401
UR  - https://doi.org/10.2991/ic3me-15.2015.265
DO  - 10.2991/ic3me-15.2015.265
ID  - Li2015/08
ER  -