Stable pressure driving system for generation of droplets on demand
- 10.2991/ic3me-15.2015.255How to use a DOI?
- Microfluidic; stable pressure; Y-junction chip; droplet; embedded system
A stable pressure driving system was designed in this paper, which can be used in Microfluidic Chips to driving reagents. Herein, two embedded controller units are used to control the stability of the reagent bottles pressure, for driving the reagents flow steady on the microfluidic chips. All parameters of system can be set by a friendly upper computer interface, and the upper and lower computer interactive communication via Wi-Fi. Y-junction microfluidic chip was taken to generate water-in-oil droplets that can be observed by Microfluidic Optical Detection Platform. Through the reagent bottles pressure control waveforms and the distribution of droplets sizes to verify the stability and reliability of stable pressure driving system. This convenient and practical system can be widely used in the reagents driving of Microfluidic Chips, and easy to implement automation may one day help enable the realization of the intelligent laboratory.
- © 2015, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - Ruichang Ke AU - Limin Lu AU - Dan Mo AU - Chen Shenglan AU - Liu Binyu PY - 2015/08 DA - 2015/08 TI - Stable pressure driving system for generation of droplets on demand BT - Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering PB - Atlantis Press SP - 1330 EP - 1333 SN - 2352-5401 UR - https://doi.org/10.2991/ic3me-15.2015.255 DO - 10.2991/ic3me-15.2015.255 ID - Ke2015/08 ER -