Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering

The Research of Microstructure UV Curing Mold Injection

Authors
Jian-Yun He, Xia Tang, Le Chang, Yu-Mei Ding, Wei-Min Yang, Peng-Cheng Xie, Xian-Chun Ye
Corresponding Author
Jian-Yun He
Available Online August 2015.
DOI
10.2991/ic3me-15.2015.32How to use a DOI?
Keywords
Microstructure component; UV curing mold injection; Mold precision; Molding process; Replication accuracy; Guidelines
Abstract

Different from the traditional “physical manufacturing” mold injection, UV curing mold injection is a new manufacturing method which combines mold injection process and UV curing technology. On the basis of the traditional mold injection process the photochemical mold manufacturing process parameters had been studied, the effect of UV material temperature and the holding pressure on products precision had been analyzed and the quality of products microstructure morphology had been evaluated with cross section graph comparison method. Meanwhile, the micro-structure formability and replication accuracy of triangular edge cross section of miniature products had been researched. The experimental results shows that it is possible for UV curing mold injection to replace the thermoplastic mold injection. UV radiation intensity has a significant impact on formability and replication accuracy of microstructure; The UV system temperature has a certain influence on microstructure replication accuracy.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering
Series
Advances in Engineering Research
Publication Date
August 2015
ISBN
10.2991/ic3me-15.2015.32
ISSN
2352-5401
DOI
10.2991/ic3me-15.2015.32How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Jian-Yun He
AU  - Xia Tang
AU  - Le Chang
AU  - Yu-Mei Ding
AU  - Wei-Min Yang
AU  - Peng-Cheng Xie
AU  - Xian-Chun Ye
PY  - 2015/08
DA  - 2015/08
TI  - The Research of Microstructure UV Curing Mold Injection
BT  - Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering
PB  - Atlantis Press
SP  - 166
EP  - 170
SN  - 2352-5401
UR  - https://doi.org/10.2991/ic3me-15.2015.32
DO  - 10.2991/ic3me-15.2015.32
ID  - He2015/08
ER  -