Preparation and Properties of Sweat-gland Type High Temperature Self-lubricating Metal Ceramic Preform

DOI

10.2991/ic3me-15.2015.20How to use a DOI?

Keywords

high temperature self-lubricating; cermet sinter; porosity; mechanical properties

Abstract

A compound pore forming agent which can be decomposed constantly in sintering process was designed and prepared. A new cermet sinter was developed by adding the compound pore forming agent into the TiC/M2 matrix material. The influences of content of TiC, sintering temperature and pore forming agent content on the porosity and mechanical properties of preforms were analysed.The results show that: the sintering bodies with different properties can be prepared by changing the matrix content, sintering parameters and pore forming agent content.The preform with interpenetrating network structure can be prepared by adding 20% TiC , 6% pore forming agent, and sintering at 1220 for 60 minutes.

Copyright

© 2015, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Tian Tian Han
AU  - Yan Jun Wang
AU  - Shou Ren Wang
AU  - Shu Long Li
PY  - 2015/08
DA  - 2015/08
TI  - Preparation and Properties of Sweat-gland Type High Temperature Self-lubricating Metal Ceramic Preform
BT  - Proceedings of the 3rd International Conference on Material, Mechanical and Manufacturing Engineering
PB  - Atlantis Press
SP  - 107
EP  - 111
SN  - 2352-5401
UR  - https://doi.org/10.2991/ic3me-15.2015.20
DO  - 10.2991/ic3me-15.2015.20
ID  - Han2015/08
ER  -