Proceedings of the 5th FIRST T1 T2 2021 International Conference (FIRST-T1-T2 2021)

Hollow Concrete Slab with Lightweight Steel Hollow to Mitigate Earthquake Disaster

Authors
Sumiati Sumiati1, *, Julian Fikri1, Fadhila Firdausa1, Revias Noerdin1, Siti Hami binti Zainal2, Mohamad Azwan bin Ikhwat2, Yusuf Hermawan3, Jessica Rizqina3
1Lecturer of Civil Engineering Department, Politeknik Negeri Sriwijaya
2Lecturer of Civil Engineering Department, Politeknik Melaka, Malaysia
3Student of Prodi D-1II Politeknik Negeri Sriwijaya
*Corresponding author. Email: sumiati@polsri.ac.id
Corresponding Author
Sumiati Sumiati
Available Online 14 February 2022.
DOI
10.2991/ahe.k.220205.072How to use a DOI?
Keywords
Earthquake Mitigation; Hollow Concrete Slab; Lightweight Steel Hollow
Abstract

Using lightweight building materials is one option to mitigate the structure of buildings and other civil buildings against earthquake disasters. This method aims to minimize the weight of the building as the magnitude of the earthquake that hits the building is directly proportional to the building’s weight itself. The floor plate of the building is made of reinforced concrete with a weight of 240 kg/m2. Therefore, this study used 30x30 mm lightweight steel hollow as a hole-forming and as a substitute for shrinkage and temperature reinforcement. This plate was assembled to flexural reinforcement with a diameter of Ø6 -100, the compressive strength of concrete (fc= 25 MPa), thus forming a one-way slab measuring 880x440x90 mm. After the slab had been cured for 28 days, the flexural strength was tested with an Automatic Tension & Compression Testing Machine having a capacity of 3000 kN. As a comparison, the test items were created of two samples with different hollow placements of 3, 4, 5, 6 hollow and solid plates. The major goal of this study is to determine the modulus of rupture (MOR), modulus of elasticity (MOE), and weight reduction owing to the use of lightweight steel hollows as hole-forming and replacement for shrinkage and temperature reinforcement in hollow concrete slabs. The results showed that using 5 and 6 lightweight steel hollows can reduce concrete weight by 10% to 14% while maintaining the maximum modulus of rupture and modulus of elasticity. However, when compared to solid plates, the modulus of rupture and modulus of elasticity were reduced by 60 to 65 percent.

Copyright
© 2022 The Authors. Published by Atlantis Press International B.V.
Open Access
This is an open access article under the CC BY-NC license.

Download article (PDF)

Volume Title
Proceedings of the 5th FIRST T1 T2 2021 International Conference (FIRST-T1-T2 2021)
Series
Atlantis Highlights in Engineering
Publication Date
14 February 2022
ISBN
978-94-6239-535-0
ISSN
2589-4943
DOI
10.2991/ahe.k.220205.072How to use a DOI?
Copyright
© 2022 The Authors. Published by Atlantis Press International B.V.
Open Access
This is an open access article under the CC BY-NC license.

Cite this article

TY  - CONF
AU  - Sumiati Sumiati
AU  - Julian Fikri
AU  - Fadhila Firdausa
AU  - Revias Noerdin
AU  - Siti Hami binti Zainal
AU  - Mohamad Azwan bin Ikhwat
AU  - Yusuf Hermawan
AU  - Jessica Rizqina
PY  - 2022
DA  - 2022/02/14
TI  - Hollow Concrete Slab with Lightweight Steel Hollow to Mitigate Earthquake Disaster
BT  - Proceedings of the 5th FIRST T1 T2 2021 International Conference (FIRST-T1-T2 2021)
PB  - Atlantis Press
SP  - 410
EP  - 414
SN  - 2589-4943
UR  - https://doi.org/10.2991/ahe.k.220205.072
DO  - 10.2991/ahe.k.220205.072
ID  - Sumiati2022
ER  -