Proceedings of the 4th Forum in Research, Science, and Technology (FIRST-T1-T2-2020)

The Severity of Polluted Insulator Surface Based on the Leakage Current Harmonic Measurements

Authors
RS Carlos, Zainuddin Nawawi, Irfan Jambak, Rumiasih, Anton Firmansyah, Indah Susanti
Corresponding Author
RS Carlos
Available Online 9 February 2021.
DOI
10.2991/ahe.k.210205.105How to use a DOI?
Keywords
Insulator surface, harmonic measurements, Leakage current
Abstract

One of the important components in the high voltage overhead lines placed on the transmission tower is an insulator. Insulators that are installed outdoor will be exposed to the environment directly. Due to environmental conditions and pollutants attached to the surface, leakage currents can flow on the surface of the insulator. Large leakage currents can damage the surface of the insulator and cause losses in the form of heat and even cause flashover. This paper provides an alternative way to prevent early flashover by detecting the severity of the insulator surface based on harmonic measurements of leakage currents. Insulator performance mainly depends on the conductivity of the surface layer being polluted or by generating pollutants via the equivalent salt deposit density (ESDD). The leakage currents were evaluated at different ESDD levels as deposits of very light, light, moderate, and heavy NaCl salt pollution on a 20 kV outdoor polymer insulators. From the experiments, it can be concluded that: i. The leakage current that occurs when the surface of the insulator is very lightly polluted has an unsymmetrical waveform that is distorted and leads to a positive with a large THD; ii. The magnitude of the leakage current with the surface of the insulator is polluted, which leads to greater weight, but the harmonic distortion and THD are getting smaller with the waveform of the leakage current signal leading to a sinusoidal waveform.

Copyright
© 2021, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 4th Forum in Research, Science, and Technology (FIRST-T1-T2-2020)
Series
Atlantis Highlights in Engineering
Publication Date
9 February 2021
ISBN
978-94-6239-332-5
ISSN
2589-4943
DOI
10.2991/ahe.k.210205.105How to use a DOI?
Copyright
© 2021, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - RS Carlos
AU  - Zainuddin Nawawi
AU  - Irfan Jambak
AU  - Rumiasih
AU  - Anton Firmansyah
AU  - Indah Susanti
PY  - 2021
DA  - 2021/02/09
TI  - The Severity of Polluted Insulator Surface Based on the Leakage Current Harmonic Measurements
BT  - Proceedings of the 4th Forum in Research, Science, and Technology (FIRST-T1-T2-2020)
PB  - Atlantis Press
SP  - 647
EP  - 651
SN  - 2589-4943
UR  - https://doi.org/10.2991/ahe.k.210205.105
DO  - 10.2991/ahe.k.210205.105
ID  - Carlos2021
ER  -