Proceedings of the 2016 International Conference on Engineering Science and Management

Movement Simulation of Sugarcane Harvester Cutter Based on ANSYS/LS-DYNA

Authors
Dongfang Hu, Yafei Zheng, Yan Zhao
Corresponding Author
Dongfang Hu
Available Online August 2016.
DOI
10.2991/esm-16.2016.62How to use a DOI?
Keywords
Sugarcane harvester cutter, design, simulation, experiments
Abstract

By analyzing the working principle of sugarcane harvester cutter, geometric model and finite element model of sugarcane are established. According to the actual working condition, the finite element analysis software was carried out to get the displacement nephogram of stress, cutting force curve and other results. The field cutting of cutter was tested and verified. Experiments show that the model has higher accuracy. The broken rate is the lowest when the speed of cutting disk is 600 r/min, advance speed is 0.5 m/s, the blade edge angle is 18 degrees, and blades for cutting Angle is 20 degrees.

Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2016 International Conference on Engineering Science and Management
Series
Advances in Engineering Research
Publication Date
August 2016
ISBN
978-94-6252-218-3
ISSN
2352-5401
DOI
10.2991/esm-16.2016.62How to use a DOI?
Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Dongfang Hu
AU  - Yafei Zheng
AU  - Yan Zhao
PY  - 2016/08
DA  - 2016/08
TI  - Movement Simulation of Sugarcane Harvester Cutter Based on ANSYS/LS-DYNA
BT  - Proceedings of the 2016 International Conference on Engineering Science and Management
PB  - Atlantis Press
SP  - 268
EP  - 271
SN  - 2352-5401
UR  - https://doi.org/10.2991/esm-16.2016.62
DO  - 10.2991/esm-16.2016.62
ID  - Hu2016/08
ER  -