Proceedings of the 2015 International Conference on Electrical, Automation and Mechanical Engineering

Optimization of Cutting Force and Surface Roughness Based on Taguchi Technique for AA6061

Authors
E. Yahya, H. AIi salim
Corresponding Author
E. Yahya
Available Online July 2015.
DOI
10.2991/eame-15.2015.38How to use a DOI?
Keywords
cutting force; surface roughness; optimizations; Taguchi method; machining parameters; significant analysis
Abstract

Optimization of machining parameters has great concerned in manufacturing environments, there for in this study cutting force and surface roughness are optimized based on machining parameters. Many researchers have established the relationship between the surface roughness and machining parameters, but less attention has been paid to tool shape and geometry, in this study tool flute is first time used as machining factor beside cutting speed, depth of cut and feed rate. Response Surface Method and analysis of variance are adopted to establish the relationship of machining parameters to the surface roughness and cutting force using Taguchi technique. Optimization of cutting force and surface roughness are simultaneously adopted, either by optimized cutting force or surface roughness. The minimum surface roughness obtained is 0.2398 µm with corresponding cutting parameter is 12.01 N.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2015 International Conference on Electrical, Automation and Mechanical Engineering
Series
Advances in Engineering Research
Publication Date
July 2015
ISBN
978-94-62520-71-4
ISSN
2352-5401
DOI
10.2991/eame-15.2015.38How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - E. Yahya
AU  - H. AIi salim
PY  - 2015/07
DA  - 2015/07
TI  - Optimization of Cutting Force and Surface Roughness Based on Taguchi Technique for AA6061
BT  - Proceedings of the 2015 International Conference on Electrical, Automation and Mechanical Engineering
PB  - Atlantis Press
SP  - 139
EP  - 141
SN  - 2352-5401
UR  - https://doi.org/10.2991/eame-15.2015.38
DO  - 10.2991/eame-15.2015.38
ID  - Yahya2015/07
ER  -