Proceedings of the 2015 International Conference on Electrical, Automation and Mechanical Engineering

<Previous Article In Volume
Next Article In Volume>

Research on Automatic Programming Methods of CNC Machining Parameters of Gear

Authors
X.R. Zhu
Corresponding Author
X.R. Zhu
Available Online July 2015.
DOI
10.2991/eame-15.2015.30How to use a DOI?
Keywords
gear; NC machining; parameter; automatic programming method
Abstract

analysis tool axis and workpiece axis motion relation principle of gear hobbing and synchronous control, interface input using the key parameter, the realization of programming automatically parameters of CNC system, the parameter programming method were discussed. Application is able to simplify the processingprocedures, shortening the processing time of programming, improve processing efficiency on special occasions.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 2015 International Conference on Electrical, Automation and Mechanical Engineering
Series
Advances in Engineering Research
Publication Date
July 2015
ISBN
10.2991/eame-15.2015.30
ISSN
2352-5401
DOI
10.2991/eame-15.2015.30How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

risenwbib
TY  - CONF
AU  - X.R. Zhu
PY  - 2015/07
DA  - 2015/07
TI  - Research on Automatic Programming Methods of CNC Machining Parameters of Gear
BT  - Proceedings of the 2015 International Conference on Electrical, Automation and Mechanical Engineering
PB  - Atlantis Press
SP  - 113
EP  - 115
SN  - 2352-5401
UR  - https://doi.org/10.2991/eame-15.2015.30
DO  - 10.2991/eame-15.2015.30
ID  - Zhu2015/07
ER  -