Theoretical and Experimental Study on Ultrasonic-Mechanical Plating

DOI

10.2991/caai-18.2018.11How to use a DOI?

Keywords

mechanical plating; ultrasonic vibration; ultrasonic transducer; amplitude transformer horn

Abstract

The traditional mechanical plating method is not suitable for parts of big bulk and of complex surface. In order to overcome above shortcoming of mechanical plating, a novel wet ultrasonic mechanical plating process was present by integrating the theories of mechanical plating and ultrasonic shot peening. Wet ultrasonic mechanical plating equipment which includes the ultrasonic generator, ultrasonic transducer and amplitude transformer horn was designed. Galvanized tests were carried out using the equipment. The properties of the plating layer were tested. The results show that plating layer whose maximum thickness can reach 30 μm can be gotten on the surface of workpiece. The bonding strength between the coating and substrate is satisfactory.

Copyright

© 2018, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Zongwei Niu
AU  - Li Li
AU  - Guangming Zheng
AU  - Xiuting Wei
AU  - Zhiyong Li
PY  - 2018/08
DA  - 2018/08
TI  - Theoretical and Experimental Study on Ultrasonic-Mechanical Plating
BT  - Proceedings of the 2018 3rd International Conference on Control, Automation and Artificial Intelligence (CAAI 2018)
PB  - Atlantis Press
SP  - 47
EP  - 50
SN  - 2589-4919
UR  - https://doi.org/10.2991/caai-18.2018.11
DO  - 10.2991/caai-18.2018.11
ID  - Niu2018/08
ER  -