Increasing Wear-resistance of Connectings Rod Bushing Supporting Surfaces in Crank Mechanisms
- DOI
- 10.2991/avent-18.2018.56How to use a DOI?
- Keywords
- crank mechanism; connecting rod; wearresistance; crankshaft; bushing
- Abstract
The article deals with the issues of improving the reliability and durability of connecting rod supporting surfaces in crank mechanisms and internal combustion engines. The disadvantages of the currently used connecting rods are considered. In the process of the crank mechanism operation, due to intensive wear of the connecting rod and crankshaft journal contacting surfaces, it is often necessary to replace the connecting rod support pads. In this case, it is necessary to disassemble and subsequently assemble the entire crank mechanism or engine. On the basis of calculations using known formulas of the elasticity theory, it is shown that the presence of a gap between the hole in the connecting rod and the crankpin of the crankshaft, with the established tolerances, leads to the fact that they contact only on a part of the arc of the circle. In order to reduce contact stresses between the connecting rod and crankpin of the crankshaft and increase the contact area, the possibility of using a collapsible connecting rod is considered in the article, which makes it possible to provide a practically zero clearance when assembling the crank mechanism on the basis of the fit method, in return for group selection of the connecting rod liners. This allows you to compensate for wear on the bearing surfaces of the connecting rod and crankshaft without additional disassembly of the entire mechanism.
- Copyright
- © 2018, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - Ya.N. Oteny AU - E.V. Morozova AU - V.F. Kazak PY - 2018/05 DA - 2018/05 TI - Increasing Wear-resistance of Connectings Rod Bushing Supporting Surfaces in Crank Mechanisms BT - Proceedings of the International Conference "Aviamechanical engineering and transport" (AVENT 2018) PB - Atlantis Press SP - 292 EP - 296 SN - 2352-5401 UR - https://doi.org/10.2991/avent-18.2018.56 DO - 10.2991/avent-18.2018.56 ID - Oteny2018/05 ER -