Proceedings of the 2015 International conference on Applied Science and Engineering Innovation

THE NON-FOURIER HEAT CONDUCTION MODEL BETWEEN THE CASTING ROLLER AND THE SLAB

Authors
Yonggang Xiong, Yunyu Liu, Jiping Wu, Wanpeng Tian, Minxian Du, Jianping Tan
Corresponding Author
Yonggang Xiong
Available Online May 2015.
DOI
10.2991/asei-15.2015.108How to use a DOI?
Keywords
Material casting, rolling forming, rapid solidification.
Abstract

Material casting and rolling forming technology is a new technology of metal rapid solidification of near net and near final forming. The high gradient temperature at the interface is a remarkable characteristic of the interface heat transfer. The heat conduction between the roller and the slab is a heat transfer behavior with dynamic boundary and directional reinforcement. Consider non Fourier heat conduction effect and analysis heat conduction mechanism and characteristics of the cast roll to determine its boundary conditions, established the non Fourier heat conduction model between the Cast roll and the slab, laying the foundation for calculate and analyse the optimal process parameters and cooperative model’s establishment.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2015 International conference on Applied Science and Engineering Innovation
Series
Advances in Engineering Research
Publication Date
May 2015
ISBN
978-94-62520-94-3
ISSN
2352-5401
DOI
10.2991/asei-15.2015.108How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Yonggang Xiong
AU  - Yunyu Liu
AU  - Jiping Wu
AU  - Wanpeng Tian
AU  - Minxian Du
AU  - Jianping Tan
PY  - 2015/05
DA  - 2015/05
TI  - THE NON-FOURIER HEAT CONDUCTION MODEL BETWEEN THE CASTING ROLLER AND THE SLAB
BT  - Proceedings of the 2015 International conference on Applied Science and Engineering Innovation
PB  - Atlantis Press
SP  - 551
EP  - 556
SN  - 2352-5401
UR  - https://doi.org/10.2991/asei-15.2015.108
DO  - 10.2991/asei-15.2015.108
ID  - Xiong2015/05
ER  -