I-Pillars of Noise Barriers Made of Prestressed Steel Fiber Concrete and Prestressed Concrete with Footings Length of 800 mm
Authors
Jindrich Cech, Petr Tej, Jirí Kolísko, Petr Pokorný, Alena Kohoutková
Corresponding Author
Jindrich Cech
Available Online April 2016.
- DOI
- 10.2991/amsee-16.2016.49How to use a DOI?
- Keywords
- pillars of noise barriers; steel fiber reinforced concrete; cracks
- Abstract
This researche examines flexural behavior of I-shaped pillars in noise barriers made of prestressed concrete and prestressed steel fiber reinforced concrete under loading corresponding to their actual loading - effect of wind on the panels. Three specimens of I-pillars were tested in laboratory and calculated by numerical analysis. The results of this research were compared and discussed in this paper.
- Copyright
- © 2016, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - Jindrich Cech AU - Petr Tej AU - Jirí Kolísko AU - Petr Pokorný AU - Alena Kohoutková PY - 2016/04 DA - 2016/04 TI - I-Pillars of Noise Barriers Made of Prestressed Steel Fiber Concrete and Prestressed Concrete with Footings Length of 800 mm BT - Proceedings of the 2016 International Conference on Advanced Materials Science and Environmental Engineering PB - Atlantis Press SP - 180 EP - 182 SN - 2352-5401 UR - https://doi.org/10.2991/amsee-16.2016.49 DO - 10.2991/amsee-16.2016.49 ID - Cech2016/04 ER -