Biomechanical Properties of Fixed Liver

DOI

10.2991/amsee-16.2016.45How to use a DOI?

Keywords

pathological drawn; fixed liver; biomechanical properties; tension test

Abstract

Pathologic sampling is the initial stage of the pathological research and forensic identification, if the thickness of samplings can not meet the requirements, observation results will be affected, resulting in a higher rate of misdiagnosis. This paper aims at studying the biomechanical properties of fixed liver, and utilized SHIMADZU universal tensile testing machine to perform tension test at various loading rates (0.5, 1, 5, 10mm/s). On this basis, drawing the mean stress-strain curves, and computing standard deviation. With loading rate increasing, the failure stresses increased from 74KPa to 101KPa, and the failure strains were about 0.1.

Copyright

© 2016, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Yubin Zheng
AU  - Wu Zheng
AU  - Yanli Wang
AU  - Feng Wang
PY  - 2016/04
DA  - 2016/04
TI  - Biomechanical Properties of Fixed Liver
BT  - Proceedings of the 2016 International Conference on Advanced Materials Science and Environmental Engineering
PB  - Atlantis Press
SP  - 165
EP  - 167
SN  - 2352-5401
UR  - https://doi.org/10.2991/amsee-16.2016.45
DO  - 10.2991/amsee-16.2016.45
ID  - Zheng2016/04
ER  -