Influence of Process Parameters on Springback of S-Shaped U-Channel Stamping

DOI

10.2991/ammsa-18.2018.16How to use a DOI?

Keywords

deep drawing; springback; analysis

Abstract

This research was conducted to analyze the influence of process parameters on springback of S-shaped U-channel stamping for DP590. The test was designed using Taguchi test and results were analyzed according to analysis of variance (ANOVA). The process parameters analysed includes punch velocity, blank holder force, friction coefficient and blank thickness. The most influential parameter is blank holder force in this analysis, followed by friction coefficient and punch velocity. And blank thickness shows the least effect. The effect of these parameters can be quantified using this analysis method. The influence of friction coeffient, blank holder force, punch velocity and blank thickness were 56.21%, 33.06%, 7.98% and 2.75% respectively. The results can be used to get a deep understanding on the springback of DP590.

Copyright

© 2018, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Wenyu Ma
AU  - Xuebin Zheng
AU  - Tao Li
AU  - Ye Yao
AU  - Shaobo Li
AU  - Hongya Zhu
PY  - 2018/05
DA  - 2018/05
TI  - Influence of Process Parameters on Springback of S-Shaped U-Channel Stamping
BT  - Proceedings of the 2018 2nd International Conference on Applied Mathematics, Modelling and Statistics Application (AMMSA 2018)
PB  - Atlantis Press
SP  - 76
EP  - 79
SN  - 1951-6851
UR  - https://doi.org/10.2991/ammsa-18.2018.16
DO  - 10.2991/ammsa-18.2018.16
ID  - Ma2018/05
ER  -