Proceedings of the 3rd Annual International Conference on Advanced Material Engineering (AME 2017)

Preparation and Tribological Performance Testing of Bonded Solid Lubricating Coatings Used on Spherical Plain Bearings

Authors
Rui Zhang, Ming Qiu, Ying-Chun Li, Da-Wei Zhou
Corresponding Author
Rui Zhang
Available Online April 2017.
DOI
https://doi.org/10.2991/ame-17.2017.67How to use a DOI?
Keywords
Solid lubricating coating, Spherical plain bearing, PTFE; MoS2, Friction and wear.
Abstract
To solve the lubricating problems of spherical plain bearings under high-low temperature, high vacuum, heavy loads and strong oxidation conditions, the PTFE and MoS2 based lubricating coatings were prepared on the inner rings of the spherical plain bearings by spraying technique. A self-made tribo-tester was used to investigate the friction coefficient, wear loss, and friction temperature increase of bearings with coatings under different oscillation frequencies. Using scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy (EDS), the worn surfaces of the coatings and the counter surfaces were characterized and analyzed. The results showed that PTFE and MoS2 based lubricating coatings significantly improved the tribological properties of the spherical plain bearings. The tribological performance of PTFE based coating was obviously superior to MoS2 based coating and its wear mechanism was adhesive wear. However, the MoS2 based coating mainly occurred severe adhesive wear and abrasive wear, and the tribological properties of spherical plain bearings with MoS2 coating were relatively optimal under low frequencies. This paper provides a reference to developing new lubricating techniques for the spherical plain bearings.
Open Access
This is an open access article distributed under the CC BY-NC license.

Download article (PDF)

Proceedings
3rd Annual International Conference on Advanced Material Engineering (AME 2017)
Part of series
Advances in Engineering Research
Publication Date
April 2017
ISBN
978-94-6252-336-4
ISSN
2352-5401
DOI
https://doi.org/10.2991/ame-17.2017.67How to use a DOI?
Open Access
This is an open access article distributed under the CC BY-NC license.

Cite this article

TY  - CONF
AU  - Rui Zhang
AU  - Ming Qiu
AU  - Ying-Chun Li
AU  - Da-Wei Zhou
PY  - 2017/04
DA  - 2017/04
TI  - Preparation and Tribological Performance Testing of Bonded Solid Lubricating Coatings Used on Spherical Plain Bearings
BT  - 3rd Annual International Conference on Advanced Material Engineering (AME 2017)
PB  - Atlantis Press
SN  - 2352-5401
UR  - https://doi.org/10.2991/ame-17.2017.67
DO  - https://doi.org/10.2991/ame-17.2017.67
ID  - Zhang2017/04
ER  -