Proceedings of the 3rd Annual International Conference on Advanced Material Engineering (AME 2017)

Study on the Penetration of Al into Fe-3 %Si Thin Sheet Using PVD Method and Its Application in Preparing Fe-6.5 %(Si+Al) Alloy

Authors
Guang-Ke Tian, Jie Ren, Tian-Guo Ma
Corresponding Author
Guang-Ke Tian
Available Online April 2017.
DOI
10.2991/ame-17.2017.58How to use a DOI?
Keywords
Fe-6.5 %(Si+Al) alloy; Magnetron-sputtering; Diffusion annealing; Penetration mechanism of Al.
Abstract

Fe-6.5 %Si alloy has excellent soft magnetic properties but is hardly able to being produced by conventional hot–cold rolling processes. It is well known that a small amount of Al adding into Fe-Si alloys is benefit to enhancing the alloy's soft magnetic properties and its working performance. In the present work pure Al layers were deposited onto Fe-3 %Si thin sheets using direct current (DC) magnetron sputtering and followed by diffusion annealing to promote Al penetrating into low-Si steel substrates. Based on the experimental and simulation results, the mechanism of Al penetrated into low-Si steel substrate was subjected to rate-controlling and Si uphill diffusion only occurred under the influence of penetrated Al being gradient distributed. As deposited Al layer's thickness reached to 32 m onto 0.23 mm Fe-3 %Si substrate and followed by a diffusion annealing at 1200 °C for 6 h, Fe-6.5 %(Si+Al) alloy can be achieved. Electron dispersive spectroscopy (EDS) analyses showed that both Si and penetrated Al profiles were evenly distributed along the depth of the prepared Fe-6.5 %(Si+Al) alloy, and the microstructure was also uniform and density. The resistivity of Fe-6.5 % (Si+Al) alloy was close to that of Fe-6.5 %Si alloy, but the working performance of the former was observed evidently better than the latter.

Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 3rd Annual International Conference on Advanced Material Engineering (AME 2017)
Series
Advances in Engineering Research
Publication Date
April 2017
ISBN
978-94-6252-336-4
ISSN
2352-5401
DOI
10.2991/ame-17.2017.58How to use a DOI?
Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Guang-Ke Tian
AU  - Jie Ren
AU  - Tian-Guo Ma
PY  - 2017/04
DA  - 2017/04
TI  - Study on the Penetration of Al into Fe-3 %Si Thin Sheet Using PVD Method and Its Application in Preparing Fe-6.5 %(Si+Al) Alloy
BT  - Proceedings of the 3rd Annual International Conference on Advanced Material Engineering (AME 2017)
PB  - Atlantis Press
SP  - 350
EP  - 357
SN  - 2352-5401
UR  - https://doi.org/10.2991/ame-17.2017.58
DO  - 10.2991/ame-17.2017.58
ID  - Tian2017/04
ER  -