Proceedings of the 3rd Annual International Conference on Advanced Material Engineering (AME 2017)

Microstructure and Property Investigation of X65MO-316L Hot Rolled Clad Coil Applied for Offshore Line Pipe

Authors
Tao Niu, Cheng-Gang An, Jia-Ming Luo, Xiao-Yong Wang, Xiao-Li Dai, Xin-Lang Wu, Caixia Zhang, Chen Yu
Corresponding Author
Tao Niu
Available Online April 2017.
DOI
https://doi.org/10.2991/ame-17.2017.8How to use a DOI?
Keywords
Clad coil, Mechanical properties, Shear strength, Microstructure, Inclusion, Inter- granular Corrosion.
Abstract
In this study, tensile, inter-granular corrosion, and impacting tests were carried out to investigate the mechanical property characteristics of X65MO-316Lclad hot rolled coil trial produced by 2250mm hot continuous rolling line, which is applied for the manufacture of offshore line pipe. SEM (Scanning Electron Microscope), TEM (Transmission Electron Microscope) were also used to observe and reveal the microstructure and inclusion of base metal and clad metal. Results show that all the mechanical properties of trial produced clad coil can meet the requirement of specification, and the shear strength reaches about 420MPa. The microstructure of X65MO (base metal) mainly consists of quasi-polygonal ferrite and acicular ferrite with refined and homogenous grain, while that of 316L (clad metal) mainly consist of typical austenite with large deformation. A small amount of ultra-fine recrystallized grains has been found on the boundaries of deformed austenite with Cr content of about 26%.
Open Access
This is an open access article distributed under the CC BY-NC license.

Download article (PDF)

Proceedings
3rd Annual International Conference on Advanced Material Engineering (AME 2017)
Part of series
Advances in Engineering Research
Publication Date
April 2017
ISBN
978-94-6252-336-4
ISSN
2352-5401
DOI
https://doi.org/10.2991/ame-17.2017.8How to use a DOI?
Open Access
This is an open access article distributed under the CC BY-NC license.

Cite this article

TY  - CONF
AU  - Tao Niu
AU  - Cheng-Gang An
AU  - Jia-Ming Luo
AU  - Xiao-Yong Wang
AU  - Xiao-Li Dai
AU  - Xin-Lang Wu
AU  - Caixia Zhang
AU  - Chen Yu
PY  - 2017/04
DA  - 2017/04
TI  - Microstructure and Property Investigation of X65MO-316L Hot Rolled Clad Coil Applied for Offshore Line Pipe
BT  - 3rd Annual International Conference on Advanced Material Engineering (AME 2017)
PB  - Atlantis Press
SP  - 47
EP  - 53
SN  - 2352-5401
UR  - https://doi.org/10.2991/ame-17.2017.8
DO  - https://doi.org/10.2991/ame-17.2017.8
ID  - Niu2017/04
ER  -